Content Addressable Memory (CAM) | 435
Example
Figure 13-1. Command Output: show cam-acl (default)
Figure 13-2. Command Output: show cam-acl (non-default)
show cam-profile
e
Display the details of the CAM profiles on the chassis and all line cards.
Syntax
show cam-profile [profile microcode microcode | summary]
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
FTOS#
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
FTOS#
To Next Page
Loading...
