Dell Force10 TeraScale E Series - Page 44

44 | File Management
www.dell.com | support.dell.com
show file-systems
ces
Display information about the file systems on the system.
Syntax
show file-systems
Command Modes
EXEC Privilege
Command
History
Example
Command Output example: show file-system
Related
Commands
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
show file-systems Command Output Fields
Field Description
size(b) Lists the size in bytes of the storage location. If the location is remote, no
size is listed.
Free(b) Lists the available size in bytes of the storage location. If the location is
remote, no size is listed.
Feature Displays the formatted DOS version of the device.
Type Displays the type of storage. If the location is remote, the word
network is listed.
Flags Displays the access available to the storage location. The following letters
indicate the level of access:
• r = read access
• w = write access
Prefixes Displays the name of the storage location.
FTOS#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
63938560 51646464 dosFs2.0 MMC rw flash:
63938560 18092032 dosFs1.0 MMC rw slot0:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
FTOS#
format (C-Series and E-Series)
Erase all existing files and reformat a filesystem.
format flash (S-Series)
Erase all existing files and reformat the filesystem in the internal
flash memory.
show file
Display contents of a text file in the local filesystem.
show sfm Display the current SFM status.