Dell Force10 TeraScale E Series - Page 443

Content Addressable Memory (CAM) | 443
Command
History
Usage
Information
CAM profile changes take effect after the next chassis reboot.
Related
Commands
show cam-ipv4flow
e
t
Display details about the IPv4Flow sub-regions.
Syntax
show cam-ipv4flow
Command Modes
EXEC Privilege
Command
History
Example
Figure 13-11. Command Example: show cam-ipv4flow
Usage
Information
If the IPv4Flow sub-region has been changed, this command displays the current IPv4Flow
configuration in one column and in the other column displays the IPv4Flow configuration that will be
loaded after the next reboot.
Version 6.3.1.0 Introduced on E-Series
copy Save the running configuration.
show cam-ipv4flow Display the CAM IPv4flow entries.
Version 6.3.1.0 Introduced on E-Series
FTOS#show cam-ipv4flow
-- Chassis Cam Ipv4Flow --
Current Settings Next Boot
Acl : 8K 5K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 2 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 8 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 13 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
FTOS#