Configuration Rollback | 455
Example
Figure 14-5. show run diff archive Command Example
time-period
c e
Set a time period to automatically save an archive file.
Syntax
time-period {minutes}
To stop the auto-save, use the no time-period {minutes} command.
Parameters
Defaults
Disabled, that is no automatically saving is configured
Command Modes
CONFIGURATION (conf-archive)
Command
History
FTOS#show run diff archive_7
running-config
-------
< policy-map-input test
running-config
-------
< archive
< maximum 3
flash:/CFGARCH_DIR/archive_7
-------
> archive
FTOS#
minutes
Enter the time, in minutes to automatically save an archive file.
Range: 5 to 1440 minutes
Version 7.6.1.0 Introduced on C-Series and E-Series
To Next Page
Loading...
