IPv6 Basics | 725
show ipv6 cam stack-unit
c e s
Displays the IPv6 CAM entries for the specified stack-unit.
Syntax
show ipv6 cam stack-unit unit-number port-set {0-1} [summary | index | ipv6 address]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
unit-number
Enter the stack unit’s ID number.
Range: 0 to 7
port-set
Enter the Port Set to
summary
(OPTIONAL) Enter the keyword
summary to display a table listing network
prefixes and the total number prefixes which can be entered into the IPv6 CAM.
index (OPTIONAL) Enter the index in the IPv6 CAM
ipv6-address
Enter the IPv6 address in the
x:x:x:x::x/n format to display networks that have
more specific prefixes.
Range: /0 to /128
Note: The
:: notation specifies successive hexadecimal fields of zeros.
Version 8.4.2.1 Introduced on C-Series and S-Series
Version 7.8.1.0 Introduced on E-Series TeraScale
To Next Page
Loading...
