Dell Force10 TeraScale E Series - Page 726

726 | IPv6 Basics
www.dell.com | support.dell.com
show ipv6 fib linecard
c e
View all Forwarding Information Base entries.
Syntax
show ipv6 fib linecard slot-number {summary | ipv6-address}
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
show ipv6 fib stack-unit
c e s
View all Forwarding Information Base entries.
Syntax
show ipv6 fib stack-unit unit-number [summary] ipv6-address
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
slot-number
Enter the number of the line card slot.
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300
summary (OPTIONAL) Enter the keyword summary to view a summary of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have more
specific prefixes.
Range: /0 to /128
Note: The
:: notation specifies successive hexadecimal fields of zeros.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series TeraScale
slot-number
Enter the number of the stack unit.
Range: 0 to 7
summary (OPTIONAL) Enter the keyword summary to view a summary of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have more
specific prefixes.
Range: /0 to /128
Note: The
:: notation specifies successive hexadecimal fields of zeros.
Version 8.4.2.1 Introduced on S-Series
Version 7.8.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series TeraScale