Steps
1 Use Storage Manager to connect to the Storage Center.
2 Click the Storage tab.
3 From the Storage tab navigation pane, select the Volumes node.
4 Create new volumes for the customer in each tier as required by their application.
5 Select the test volumes to delete.
6 Right-click on the selected volumes and select Delete. The Delete dialog box opens.
7 Click OK.
8 In the Volumes view, expand the Recycle Bin.
9 In the right pane, click Empty Recycle Bin.
The Empty Recycle Bin dialog box opens.
10 Click OK to conrm that you want to permanently delete all volumes in the Recycle Bin.
Send Diagnostic Data Using SupportAssist
After replacing components, use SupportAssist to send diagnostic data to technical support.
1 Use Storage Managerto connect to the Storage Center.
2 In the Summary tab, click Send SupportAssist Information Now, which is located under SupportAssist Actions in the Status pane.
The Send SupportAssist Information Now dialog box opens.
3 Select Storage Center Conguration and Detailed Logs.
4 Click OK.
70
Perform Post-Setup Tasks
To Next Page
Loading...
Need help?
General
Weight and Dimensions
