Worksheet to Record System Information
Use the following worksheet to record the information that is needed to install the SCv3000 and SCv3020 storage system.
Storage Center Information
Gather and record the following information about the Storage Center network and the administrator user.
Table 7. Storage Center Network
Service Tag ________________
Management IPv4 address (Storage Center management address) ___ . ___ . ___ . ___
Top Controller IPv4 address (Controller 1 MGMT port) ___ . ___ . ___ . ___
Bottom Controller IPv4 address (Controller 2 MGMT port) ___ . ___ . ___ . ___
Subnet mask ___ . ___ . ___ . ___
Gateway IPv4 address ___ . ___ . ___ . ___
Domain name ________________
DNS server address ___ . ___ . ___ . ___
Secondary DNS server address ___ . ___ . ___ . ___
Table 8. Storage Center Administrator
Password for the default Storage Center Admin user ________________
Email address of the default Storage Center Admin user ________________
iSCSI Fault Domain Information
For a storage system with iSCSI front-end ports, gather and record network information for the iSCSI fault domains. This information is
needed to complete the Discover and Congure Uninitialized Storage Centers wizard.
NOTE
: For a storage system deployed with two Ethernet switches, Dell recommends setting up each fault domain on separate
subnets.
Table 9. iSCSI Fault Domain 1
Target IPv4 address ___ . ___ . ___ . ___
Subnet mask ___ . ___ . ___ . ___
Gateway IPv4 address ___ . ___ . ___ . ___
IPv4 address for storage controller module 1: port 1 ___ . ___ . ___ . ___
IPv4 address for storage controller module 2: port 1 ___ . ___ . ___ . ___
C
Worksheet to Record System Information 99