Dell SCv3000 - Add the Scv300 and Scv320 Expansion Enclosures to the B-Side of the Chain

Figure 54. Connect the A-Side Cables to the Expansion Enclosures
1
Storage system 2 Storage controller 1
3 Storage controller 2 4 Expansion enclosure 1
5 Expansion enclosure 2
2 Label the back-end cables.
Add the SCv300 and SCv320 Expansion Enclosures to the B-
Side of the Chain
Connect the expansion enclosures to one side of the chain at a time to maintain drive availability.
1 Cable the expansion enclosures to the B-side of the chain.
a Connect a SAS cable from storage controller 1: port 2 to expansion enclosure 2: bottom EMM, port 2.
b Connect a SAS cable from storage controller 2: port 1 to expansion enclosure 1: bottom EMM, port 1.
Adding or Removing Expansion Enclosures
73