Delta Electronics ASDA-B2 series - Page 182

ASDA-B2 Chapter 7 Servo Parameters
Revision September 2013 7-17
P0-16 Reserved (Do Not Use)
Address: 0020H
0021H
P0-17 CM1A Status Monitor Selection 1
Address: 0022H
0023H
Operation
Interface:
Keypad/Software Communication
Related Section: N/A
Default: 0
Control
Mode:
-
Unit: -
Range: 0 ~ 18
Data Size: 16-bit
Display
Format:
Decimal
Settings:
This parameter is used to determine the drive status found in P0-02. The selected
drive status will be displayed by P0-09.
For example:
Set P0-17 to 7, then all consequent reads of P0-09 will return the motor rotation speed
in r/min.
P0-18 CM2A Status Monitor Selection 2
Address: 0024H
0025H
Operation
Interface:
Keypad/Software Communication
Related Section: N/A
Default: 0
Control
Mode:
-
Unit: -
Range: 0 ~ 18
Data Size: 16-bit
Display
Format:
Decimal
Settings:
This parameter is used to determine the drive status found in P0-02.
P0-19 CM3A Status Monitor Selection 3
Address: 0026H
0027H
Operation
Interface:
Keypad/Software Communication
Related Section: N/A
Default: 0
Control
Mode:
-
Unit: -
Range: 0 ~ 18
Data Size: 16-bit
Display
Format:
Decimal
VARITEL INGENIERIA ELECTRONICA S.A.
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.