Delta Electronics ASDA-B2 series - Page 263

Chapter 7 Servo Parameters ASDA-B2
7-98 Revision September 2013
Setting value: 0x48
DI Name DI Function Description
Trigger
Method
Control
Mode
TQP
Torque command source. Please refer to the settings of
P2-66 Bit0.
Level
Triggered
T
Setting value: 0x49
DI Name DI Function Description
Trigger
Method
Control
Mode
TQN
Torque command source. Please refer to the settings of
P2-66 Bit0.
Level
Triggered
T
NOTE
1) 11 ~ 17: Single control mode, 18 ~ 20: Dual control mode
2) When P2-10 to P2-17 and P2-36 is set to 0, it indicates input function is disabled.
VARITEL INGENIERIA ELECTRONICA S.A.
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.