ASDA-B2 Chapter 10 Specifications
Revision September 2013 10-3
Footnote:
*1 Rated rotation speed: When full load, speed ratio is defined as the minimum speed (the motor will
not pause).
*2 When command is rated rotation speed, the speed fluctuation rate is defined as:
(Empty load rotation speed – Full load rotation speed) / Rated rotation speed
*3 TN system: A power distribution system having one point directly earthed, the exposed conductive
parts of the installation being connected to that points by protective earth conductor.
*4 Please refer to “Chart of load and operating time” in section 10.4 “Overload Characteristics”.
VARITEL INGENIERIA ELECTRONICA S.A.
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.