Chapter 3 Connections and Wiring ASDA-B2
3-22 Revision September 2013
There are numerous operation mode of this servo drive (please refer to Chapter 6.1).
Each operation mode needs different I/O signal. In order to use the terminal in a more
efficient way, the selection of I/O signal has to be programmable. That is to say, users
can choose the desired DI/DO signal to meet the demand. Basically, the default setting
of DI/DO signal has already have the appropriate function which can satisfy the demand
of normal application.
VARITEL INGENIERIA ELECTRONICA S.A.
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
To Next Page
Loading...
