Denon AVR-3808


Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Some typical examples are described below.
SOURCE SELECT
TUNER
PHONO
HDP
DVD
CD
TV/CBL
Select input source and make playback
settings
AUTO SETUP
1 2 3 4 5
Start
RETURN
Amp Assign
Config 7.1(B)
STEP1 Speaker Detection
Please place the microphone at ear
height at main listening position.
Start Auto Setup
Enter Cancel
Selected item
name
List of subsequent items
Guidance text for item at
cursor position
Operation step indicators
Illustration
Operation
button guidance
Guidance text for item at cursor
position
Operation guidance text
n Icon
n List
Assign
Input Mode
Rename
Other
Switch the selected item
Selected item
Switch the selected item
Switch to the next item
Selected item
Example: Browse Menu (Top Menu)
Examples of GUI Screen Displays
Example: Menus with Illustrations
(Auto Setup)
Cursor Position Display
Operations
The same operation is possible on the main unit or remote control
unit.
b Switch the selected item using
ui.
1
Press the MENU button.
The GUI menu is displayed.
b To operate from the main remote control unit, be sure to set the
remote control unit to the AMP mode.
2
Press the u i p button to select the menu to be set
or operated.
b To return to the previous item, press the o or RETURN button.
3
Press the ENTER button to enter the setting.
4
Press the MENU button to  nish.
Switch to the next item
Setup
When “Screensaver” is set to “ON”, the screensaver is activated if no
operation is performed for about 3 minutes.
1.AVR3808E2_ENG_104.indd 27 2007/10/25 15:16:47