0
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Front
Rear
All
One
OFF
ON
OFF
A0
Playback Mode
Make settings for “NET/USB” playback.
[Input source]
USB Select
Select USB port to use.
[Selectable items]
[Selectable items]
[Selectable items]
Repeat
Make settings for repeat mode.
Random
Make random mode settings.
Favorites
All Music
Direct Play
Set the folder to be played using the DIRECT PLAY button on the sub
remote control unit.
[Selectable items]
Match the port to be used and the setting.
Input signal Display
Dolby
Digital
Source
DOLBY DIGITAL
(other than 2ch) /
DOLBY DIGITAL
EX
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL+PLgx CINEMA
DOLBY DIGITAL+PLgx MUSIC
DOLBY DIGITAL
Plus
DOLBY DIGITAL +
DOLBY TrueHD DOLBY TrueHD
DTS
Surround
Source
DTS (5.1ch) /
DTS-ES Discrete
6.1 /
DTS-ES Matrix
6.1 /
DTS 96/24
DTS SURROUND
DTS+PLgx CINEMA
DTS+PLgx MUSIC
DTS+NEO:6
DTS ES MTRX6.1 (z1)
DTS ES DSCRT6.1 (z2)
DTS 96/24 (z3)
DTS-HD High
Resolution Audio
DTS-HD HI RES
DTS-HD Master
Audio
DTS-HD MSTR
DVD-
Audio,
SACD
PCM (multi ch) /
DSD (multi ch)
MULTI CH IN
MULTI IN+PLgx CINEMA
MULTI IN+PLgx MUSIC
MULTI CH IN 7.1
Select the “Cinema”, “Music”, “Game” and “Pro Logic” modes at GUI
menu “Parameter” – “Audio” – “Surround Parameters” – “Mode”
(vpage 42).
z1 : This is displayed when the input signal is “DTS-ES Matrix 6.1”
and the AVR-3808’s “AFDM” setting is set to “ON”.
z2 : This is displayed when the input signal is “DTS-ES Discrete
6.1”.
z3 : This is displayed when the input signal is “DTS 96/24”.
For details, see page 78.
STANDARD
:
This mode is for decoding the input signals according to their format
and playing surround sound.
The display when the STANDARD mode is selected depends on the
input signal and surround back output playback mode.
[Selectable items]
Playing Multi-channel Sources
(Dolby Digital, DTS, etc.)
DOLBY PLgx
DTS NEO:6
Surround Playback of 2-channel Sources
[Selectable items]
n When not using a surround back speaker
DOLBY PLg
DTS NEO:6
DOLBY PLgx
or DOLBY PLg
:
The signals are decoded in DOLBY PLgx or
DOLBY PLg for playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
: This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder. When this mode is selected, “DOLBY
PL” is displayed.
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
[Selectable items]
Standard Playback
This is the standard mode for enjoying surround sound
according to the program source.
Surround Modes
n When using a surround back speaker
To select these surround modes pressing the STANDARD button on the
main unit or press the STD button on the main remote control unit. The
mode switches each time the button is pressed.
Setup
NET/USB
To Next Page
Loading...
Need help?
General
