Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
f
Preset Name
Assign name to a preset memory.
Names containing up to 8 characters can be input.
[Input source] TUNER
A1 ~ G8
Select the preset memory number.
g
Input Mode
Make input mode and decode mode settings for this
source.
The selectable input modes depend on the input source
and “Assign” setting (vpage 39).
Input Mode
Set the input mode for this source.
[Selectable items]
Analog
EXT. IN
[Input source] TUNER
PHONO
(
iPod
)
[Selectable items]
Auto
HDMI
Digital
Analog
EXT. IN
[Input source]
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
• When a digital signal is properly input, the “ ” indicator lights on
the display. If the “ ” indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
[Input source] NET/USB
[Selectable items]
Auto
EXT. IN
j
Other
Make various other settings.
Video Select
Switch video input source while listening to audio signal.
[Selectable items]
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
SOURCE
Operating from the main unit
Press the VIDEO SELECT button, then turn the SOURCE SELECT knob until
the desired picture appears.
b To cancel, press the main unit’s VIDEO SELECT button, then turn the
main unit’s SOURCE SELECT knob and select “SOURCE”.
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
Video Convert
Automatically convert video input signal to monitor output format.
[Selectable items]
ON
OFF
[Input source] DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
Source Level
Corrects the playback level of the selected input source’s audio input.
[Variable range]
For input sources for which “HDMI” and “Digital” are set at the GUI
menu “Assign” setting, the analog input level and digital input level can
be set separately.
–12dB
~
0dB
~
+12dB
Operating from the main unit or main remote
control unit
Press the INPUT MODE button on the main unit or the INPUT button on
the main remote control unit.
z1: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “HDMI” (vpage 39). Excluding CD.
z2: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “Digital” (vpage 39).
h
Rename
Change the display name for this source.
Names containing up to 8 characters can be input.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
[Selectable items] Auto
PCM
DTS
[Input source] CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
Decode Mode
Set the decode mode for this source.
• This can be selected for input sources for which the GUI menu
“Assign” setting is set to “HDMI” or “Digital” (vpage 39).
• Only set “PCM” and “DTS” when playing the respective signals.
Auto
EXT. IN
HDMI
z1
Digital
z2
Analog
Setup
NOTE
When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. If this
happens, please set the conversion mode to “OFF”.
To Next Page
Loading...
Need help?
General
