Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Stopping playback temporarily
During playback, press ENTER.
Press again to resume playback.
To stop
During the play or pause mode, press and hold ENTER.
Searching up or down pages
Press [SEARCH], then press o (down) or p (up).
To cancel, press ui or [SEARCH].
Searching by fi rst letter (Character search)
This operation is convenient for choosing items from the menu screens
for Internet radio stations or fi les stored on the computer.
q When the menu screen is displayed, press [SEARCH] twice.
w Use o p to select the fi rst letter you want to search for.
If there are multiple items starting with the selected letter, they are
displayed in alphabetical order.
If it is not possible to search the list, “Unsorted list...” is displayed.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio fi les and achieve a richer sound.
The default setting is “Mode3”.
• The time for which the GUI menus are displayed can be set at GUI
menu “Manual Setup” – “Option Setup” – “GUI” – “NET/USB”
(vpage 35).
• The display can be switched between the artist name, track name,
album name.
ENTER
<SOURCE SELECT> uiop
[NET/USB]
[ NET/DTU]
ENTER
[SEARCH]
[1 ~ 8]
[A ~ G]
[MEMO]
uiop
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
1
Make the necessary preparations.
q Check the network environment, then turn on the AVR-3808’s
power. (vpage 20 “Network Audio”)
w If settings are required, make the network settings.
(vpage 32, 33 “Network Setup”)
e Prepare the computer. (vComputer’s operating instructions)
Install “Windows Media Player ver. 11”.
2
Either turn <SOURCE SELECT> or press [NET/USB]
(AMP mode) to select “NET/USB”.
(AMP mode) to select “NET/USB”.
: “Source Select” –“NET/USB” –“Play”
(vpage 37)
3
To operate using the main remote control unit, set the
remote control unit to the NET/DTU ( ) mode.
(vpage 60 “Remote Control Unit Operations”)
4
Use ui to select the menu, then press ENTER or p
to select the le you want to play.
5
Press ENTER or p.
Playback starts.
Basic Operation
• There are many Internet radio stations on the Internet, and the
quality of the programs they broadcast as well as the bit rate of the
tracks varies widely.
Generally, the higher the bit rate, the higher the sound quality, but
depending on the communication lines and server traffi c, the music
or audio signals being streamed may be interrupted.
Inversely, lower bit rates mean a lower sound quality but less
tendency for the sound to be interrupted.
• “Server Full” or “Connection Down” is displayed if the station is
busy or not broadcasting.
• On the AVR-3808, folder and fi le names can be displayed as titles. Any
characters that cannot be displayed are replaced with “ . (period)”.
1
Use ui to select “Internet Radio”, then press ENTER
or p.
2
Use ui to select the item you want to play, then
press ENTER or p.
The station list is displayed.
3
Use ui to select the station, then press ENTER or
p.
Playback starts once buffering reaches “100%”.
Listening to Internet Radio
(AMP mode)
( mode)
Playback
1.AVR3808E2_ENG_104.indd 58 2007/10/25 15:17:54
To Next Page
Loading...
Need help?
General
