Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Operating the AVR-3808 Using a Browser
(Web control)
This function lets you operate the AVR-3808 using Internet
Explorer.
1
Check the AVR-3808’s IP address.
: “Manual Setup” – “Network Setup” –
“Network Information” (vpage 33)
2
Input the AVR-3808’s IP address in Internet
Explorer.
The AVR-3808 can be operated in the same way as with regular
Internet browsing.
To use the web control function, set the GUI menu “Manual Setup”–
“Network Setup” – “Other” – “Power Saving” setting to “OFF”
(vpage 33).
Other Operations and
Functions
Other Operations
Playing Super Audio CD
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are fi rst converted
into PCM format, then into analog signals.
• “DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.
Playback
1
Assign “DENON LINK” or “HDMI” at the “Digital”
or “HDMI” setting (vpage 39).
2
Either turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The “ ” or “ ” indicator lights on the display.
3
Use INPUT MODE to select the input mode (vpage
38).
Select the input mode according to the program source to be
played.
4
Select the surround mode (vpage 40, 41).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.