Desoutter CVIC - Appendix - Printing Format of Tightening Results

6159932010-09
47 / 60
English
CVIC-MODCVIC-MULTICVIC
Appendix - Printing Formats for tightening results
PC2 FORMAT:
1 char. <CR>
2 range or cycle number
2 fastener number
3 «T=+»
5 torque in 1/10 of Nm
1 <LF>
1“ “
1 <CR>
2 range or cycle number
2 fastener number
3 «A=+»
5 angle in 1/10 of degree
2 <LF>
Example of result:
<CR>0109T=+00400<LF> <CR>0109A=+01200<LF><LF>
PC3 FORMAT:
1 char. A (frame type)
3 station number (1 to 250)
3 port number (1 to 32)
1 configuration(A to O correspond to configurations 1 to 15)
1 Z (system identifier)
1 report code (see chart below)
6 date (year, month, day)
6 time(hour, minute, second)
8 torque
5 angle
1 <CR>
3 <LF>
Report Code: ASCII code 0100 XXXX
| | | |__ 1=min. torque
| | |_______ 1=max. torque
| |____________ 1=min. angle
|_________________ 1=max. angle