Need help?Do you have a question about the DEV 2190 and is the answer not in the manual?
Product warranty details, defects, repair process, and customer obligations.
Specifies conditions under which the warranty does not apply, such as misuse or improper maintenance.
Safety measures for operation, service, and repair, including electrical and heat hazards.
Overview of the system's features, options, and modular structure.
Describes the front and rear panel layout, slots, and module placement.
Details on monitoring, control via LEDs, push buttons, Web Interface, and SNMP.
Explains amplifier modules and their output ports at the rear.
Describes routing signals to splitters for distribution to recipients.
Explains combining signals to feed amplifier module inputs.
How IRD controlled switches and extensions are used for signal routing.
Details redundant amplifier options for failsafe operation and their configurations.
Describes hot-pluggable power supply modules, their LEDs, and redundancy.
Explains the fan and monitoring module, its LEDs, and push button.
Details the CPU module functions, reset button, Ethernet, and serial connectors.
Describes amplifier modules, their monitoring ports, LEDs, and LNB power features.
Explains the purpose and placement of redundancy switch modules.
Illustrates a configuration with distribution and amplifier options, showing slot population.
Shows a configuration with combiner options and their connections.
Illustrates a configuration with IRD controlled switch options and extensions.
Shows a configuration with redundant amplifier options and their modules.
Illustrates a mixed configuration combining 1+1 and 1:1 redundancy.
Lists the items included in the product delivery.
General instructions for installing the product, including warnings.
Guidance on rack mounting and securing the chassis for proper integration.
Details grounding, connecting data cables (Ethernet), and power.
Instructions for connecting RF cables, torque specifications, and termination.
Procedures for exchanging modules, including notes on hot-plugging and safety.
Steps for backing up and transferring device configuration data for safety.
Explains methods for resetting the device and restoring factory settings.
Details factory settings for amplifier module RF level monitoring and LNB power.
Lists default IP address, Netmask, and Gateway settings.
Specifies default SNMP Read/Write Community settings.
Describes the serial interface, its connector, and configuration parameters.
Details the Ethernet interface, its connector, and basic connection types.
Explains how to connect the device to a PC or local network via Ethernet.
Describes how to change network setup using a serial connection and terminal software.
Details how to start and exit the serial interface configuration program.
Instructions for setting the IP address via serial interface.
Instructions for setting the netmask via serial interface.
Instructions for setting the gateway via serial interface.
Explains Local, Remote, and Auto modes for device control.
Describes device control via push buttons and Web Interface.
Explains device control via SNMP.
Explains Auto Mode for autonomous switching with redundant options.
Details autonomous switching behavior based on RF levels and options.
Guides on how to access the Web Interface using a browser and default login.
Describes the Web Interface main window structure, tabs, and mode indicators.
Details the Status Tab for viewing device configuration, operating status, and active events.
Introduces the Control Tab for accessing device functionalities and module settings.
Explains the 1+1 switch panel for managing redundancy units.
Details the Amplifier panel for setting gain, slope, RF threshold, and LNB power.
Describes the Events Tab for displaying, acknowledging, and deleting detected errors.
Explains the Recording Tab for visualizing and storing captured data.
Introduces the Setup Tab for configuring user, system, and software service settings.
Manages user accounts, permissions (admin, read/write, read), and passwords.
Allows changing user password and interface language.
Manages user accounts, permissions (admin, read/write, read), and passwords.
System configuration settings.
Configures device IP address, Netmask, Gateway, Nameservers, Timeservers, and Timezone.
Configures SNMP settings like System Name, Location, Communities, Traps, and MIB download.
Feature configuration settings.
Configures the interval for signal recording data capture.
Configures Auto Mode assignment for devices with redundant amplifier options.
Service functions for device management.
Resets device settings to factory defaults, with option to keep IP settings.
Manages device data backups, including configuration and logs.
Provides means to update device firmware or reset the device.
Displays hardware and software configuration details for support purposes.
Provides an overview of the Simple Network Management Protocol (SNMP).
Specifies DEV Systemtechnik's Private Enterprise Number and Device Index.
Explains the structure of the MIB tree for the switch system.
Describes the objects within the .devSwitch section of the MIB tree.
Details specific traps supported by the MIB, like alarm text and mode change.
Lists SNMP objects related to the instrument, like MAC address and firmware revision.
Overview of SNMP application-specific objects.
Describes the SNMP object for controlling the device operation mode.
Describes the port table for features and settings of each amplifier module.
Describes the SNMP object for the port index.
Describes the SNMP object for enabling/disabling error messages and influences Auto Mode switching.
Describes the SNMP object for the port type (1:1, 1+1 main/backup).
Sets the RF threshold level for monitoring.
Indicates if bias (LNB power) indication is provided.
Controls the LNB power (bias) supply state.
Sets the lower limit for LNB current monitoring.
Sets the upper limit for LNB current monitoring.
Sets the gain control value.
Sets the slope (tilt) value.
Reports the health status of the module to which the port belongs.
Sets the gain mode (manual, auto, mute), read-only for this device.
Configures which SNMP traps are enabled.
Configures which error classes generate traps or appear in the Web Interface.
Contains entries for detected errors, including code, count, and status.
Shows the status of each power line.
Shows the status of each power supply module.
Shows the status of each fan.
Reports the internal device status.
Reports the status of supporting hardware like fan & monitoring module.
Describes how software errors are reported via Web Interface, SNMP, or alarm traps.
Lists error codes for power supply issues.
Lists error codes for fan and monitoring module failures.
Lists error codes for redundancy switch module failures.
Lists error codes for amplifier modules and ports.
Lists other error codes requiring assistance from DEV Systemtechnik.
Details the AC power plug connector and pin assignments.
Details the Ethernet connector and pin assignments.
Details the serial connector and pin assignments.
Lists harmonized standards considered during development and production.
Declares conformity with EU directives, listing product options and hazardous substances.
To Next Page
General