User Manual DEV 2190
64 Copyright DEV Systemtechnik GmbH 2009-2017
In the following screenshot, the first three slots are occupied with a backup set for
each type of data. These backup sets were created in the way as described above.
As indicated, the content of the selected slot determines which of the five buttons
is active or not. In the screenshot above the button is grayed out since it is
not possible to restore the content of an "Error Log" backup set. The
button is active only if either a slot with a backup set containing "Module Data" or
"Device Data" is selected.
Note:
A backup set can only be restored to a device with the same product number.
Otherwise the message "Error: Backup created with different device" appears
instead of the button.
If a backup set containing "Module Data" is selected as shown in the next screen-
shot and if the button is operated, the available categories (as described
above) are listed. It is possible to (de-)select particular categories via the adjacent
check boxes before operating the button.
To Next Page
Loading...