Making copies
5
ineo 163/213 5-13
5.3 Selecting the paper source
1 Position the document to be copied.
– Refer to "Loading the document" on page 4-18.
2 Press the [Paper] key.
3 Press the [+] or [,] key until "AUTO" or the desired paper drawer is
selected, and then press the [OK] key.
The main screen appears again.
4 If necessary, specify any other copy settings.
– Refer to "Specifying a zoom setting" on page 5-53.
– Refer to "Selecting a density setting" on page 5-62.
– Refer to "Advanced copy operations" on page 6-3.
5 Press the [Start] key.
PAPER SELECT
TRAY1:
AUTO
TRAY2:
To Next Page
Loading...
