5
Making copies
5-62 ineo 163/213
5.7 Selecting a density setting
Document type and copy density settings
- "TEXT" setting:
Select this setting when copying text documents to emphasize contours
and reproduce text documents with sharpness.
The automatic density level and 9 manual density levels are available.
– "AUTO" Density setting: The density level is automatically adjusted
according to the document being copied.
– "MANUAL" Density setting Press the [*] key (lighter) and the [)] key
(darker) to adjust the density according to the document to be copied.
- "PHOTO" setting:
Select this setting when copying documents containing many areas with
halftones (intermediate colors), such as photographs.
The "AUTO" Density setting cannot be selected if the "PHOTO" setting is
selected.
- "TEXT/PHOTO" setting:
Select this setting when copying documents containing both text and
photos.
The automatic density level and 9 manual density levels are available.
– "AUTO" Density setting: The density level is automatically adjusted
according to the document being copied.
– "MANUAL" Density setting In order to prevent the image on the back of
newspaper or magazine articles from appearing in the copy, press the [*]
key (lighter) to select a lighter density level. In order to reproduce pale
colors in bright areas of the image, press the [)] key (darker) to select a
darker density level.
2
Note
Selecting a density level that is too dark may cause the media color of the
document to be reproduced, and selecting a level that is too light may
produce a very faint copy. Therefore, select the appropriate level
depending on the document.
To Next Page
Loading...
