Develop ineo 213 - Enabling the AUTO SHUT OFF Parameter to be Set to OFF (AUTO SHUT OFF Parameter)

Utility mode/Copy mode parameters
7
ineo 163/213 7-41
Enabling the "AUTO SHUT OFF" parameter to be set to "OFF" ("AUTO
SHUT OFF" parameter)
1 Display the "ADMIN. MANAGEMENT" menu.
– Refer to "Displaying the "ADMIN. MANAGEMENT" menu" on
page 7-37.
2 Press the [+] or [,] key until "AUTO SHUT OFF" is selected, and then
press the [OK] key.
3 Press the [+] or [,] key until "ENABLE" is selected, and then press the
[OK] key.
The "ADMIN. MANAGEMENT" menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
ADMIN. MANAGEMENT
AUTO SHUT OFF
ADMINISTRATOR NO.
ACCOUNT TRACK
AUTO SHUT OFF
ENABLE
DISABLE