Develop ineo 213 - Copying with a Recalled Copy Program

Advanced copy operations
6
ineo 163/213 6-33
Copying with a recalled copy program
1 Position the document to be copied.
– Refer to "Loading the document" on page 4-18.
2 Press the [Mode Memory] key.
3 Press the [+] or [,] key until "RECALL" is selected, and then press the
[OK] key.
4 Press the [+] or [,] key until the desired program number is selected,
and then press the [OK] key.
5 Press the [Start] key.
MODE MEMORY
REGISTER
RECALL
MODE MEMORY REGIST.
PROGRAM2
PROGRAM1