Utility mode/Copy mode parameters
7
ineo 163/213 7-9
Specifying energy-saving (Power Save mode) settings ("ENERGY SAVE
MODE" parameter)
1 Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2 Press the [+] or [,] key until "ENERGY SAVE MODE" is selected, and
then press the [OK] key.
3 Use the keypad to type in the length of time until the machine enters
Power Save mode, and then press the [OK] key.
– The time can be set between 1 and 240 minutes.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
ENERGY SAVE MODE
AUTO PANEL RESET
AUTO SHUT OFF
ENERGY SAVE MODE
15min(1-240min)
To Next Page
Loading...
