6
Advanced copy operations
6-32 ineo 163/213
3 Press the [+] or [,] key until "REGISTER" is selected, and then press
the [OK] key.
4 Press the [+] or [,] key until the desired program number is selected,
and then press the [OK] key.
– If copy settings have already been registered with the selected
program number, the previously stored copy settings are deleted
and replaced with the new ones.
The current copy settings are registered.
MODE MEMORY
REGISTER
RECALL
MODE MEMORY REGIST.
PROGRAM2
PROGRAM1
To Next Page
Loading...
