Develop ineo 213 - (PAPER TYPE Parameter); Specifying Special Paper Settings for Paper Drawers; Custom Size Memory

7
Utility mode/Copy mode parameters
7-26 ineo 163/213
Specifying special paper settings for paper drawers ("PAPER TYPE"
parameter)
1 Display the "PAPER SOURCE SETUP" menu.
– Refer to "Displaying the "PAPER SOURCE SETUP" menu" on
page 7-20.
2 Press the [+] or [,] key until "PAPER TYPE" is selected, and then press
the [OK] key.
3 Press the [+] or [,] key until the desired paper drawer is selected, and
then press the [OK] key.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
PAPER SOURCE SETUP
TRAY1 PAPER
INCH/METRIC
PAPER TYPE
INCH/METRIC
TRAY2
TRAY1
TRAY3