Develop ineo 213 - Selecting the Setting for Double-Sided Copying (DUPLEX COPY Parameter)

7
Utility mode/Copy mode parameters
7-78 ineo 163/213
Selecting the setting for double-sided copying ("DUPLEX COPY"
parameter)
2
Note
A setting can be selected for this parameter only if the optional duplex
unit is installed (ineo 213 only).
1 Display the "COPY SETTING 2" menu.
– Refer to "Displaying the "COPY SETTING 2" menu" on page 7-71.
2 Press the [+] or [,] key until "DUPLEX COPY" is selected, and then
press the [OK] key.
UTILITY MODE
RETURN
COPY SETTING 2
COPY SETTING 2
DUPLEX COPY
MIXED ORIGINAL
CRISSCROSS MODE