Develop ineo 213 - Specifications and Machine Care

Appendix
10
ineo 163/213 10-3
10 Appendix
10.1 Specifications
Main unit (ineo 163/213)
Specification ineo 163 ineo 213
Type Desktop
Platen Stationary
Photoconductor OPC
Copying system Electro photographic printing system
Developing system HMT method
Fusing system Heat-roller-fixing system
Resolution 600 dpi e 600 dpi
Document • Types: Sheets, books, and other three-dimensional objects
• Size: Maximum A3w, Ledger w (11" e 17" w)
•Weight: 3 kg
Paper types • Plain paper (60 g/m
2
to 90 g/m
2
), recycled paper (60 g/m
2
to 90 g/m
2
),
• Special paper: Thick paper (91 g/m
2
to 157 g/m
2
), over-
head projector transparencies, postcards, label sheets, en-
velopes
* Special paper can only be fed through the 1st paper drawer
or bypass tray.
Copy sizes 1st paper drawer:
Metric sizes:
A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, FLS-L (210 e 330)
Inch sizes:
Ledger w (11 e 17 w), 11 e 14 w, Legal w (8-1/2 e 14
w), Letter w/v (8-1/2 e 11 w/v), Invoice w/v (5-1/2 e 8-
1/2 w/v)
Custom size: 90 mm to 297 mm wide; 140 mm to 432 mm long
Bypass tray:
A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v
(Width: 90 mm to 297 mm; Length: 140 mm to 432 mm)
Paper capacity 1st paper drawer:
• Plain paper/recycled paper: 250 sheets
• Special paper (thick paper, overhead projector transparen-
cies, postcards, label sheets): 20 sheets
• Envelopes: 10
Bypass tray:
• Plain paper/recycled paper/special paper: 1 sheet
Warm-up time Less than 30 seconds (at
room temperature (23 °C))
Less than 15 seconds (at
room temperature (23 °C))