Develop ineo 213 - Changing the Administrator Access Code (ADMINISTRATOR NO. Parameter); Account Track; Copy Setting 1

Utility mode/Copy mode parameters
7
ineo 163/213 7-39
Changing the administrator access code ("ADMINISTRATOR NO."
parameter)
1 Display the "ADMIN. MANAGEMENT" menu.
– Refer to "Displaying the "ADMIN. MANAGEMENT" menu" on
page 7-37.
2 Press the [+] or [,] key until "ADMINISTRATOR NO." is selected, and
then press the [OK] key.
3 Use the keypad to type in the current administrator access code, and
then press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
ADMIN. MANAGEMENT
AUTO SHUT OFF
ADMINISTRATOR NO.
ACCOUNT TRACK
ADMINISTRATOR NUMBER
CURRENT NO.:-----