7
Utility mode/Copy mode parameters
7-20 ineo 163/213
Displaying the "PAPER SOURCE SETUP" menu
1 Press the [Utility] key.
The "UTILITY MODE" menu appears.
2 Press the [+] or [,] key until "PAPER SOURCE SETUP" is selected,
and then press the [OK] key.
The "PAPER SOURCE SETUP" menu appears.
3 Press the [+] or [,] key until the desired PAPER SOURCE SETUP
parameter is selected, and then press the [OK] key.
– The following PAPER SOURCE SETUP parameters are available.
INCH/METRIC
TRAY1 PAPER
PAPER TYPE
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
To Next Page
Loading...
