Making copies
5
ineo 163/213 5-31
Copying onto manually fed paper (multi bypass tray)
2
Reminder
When loading thick paper or postcards, be sure to flatten them if they are
curled.
1 Position the document to be copied.
– Refer to "Loading the document" on page 4-18.
2 Load the paper with the side to be
printed on facing down, lightly sliding
the paper as much as possible into
the feed slot.
The BYPASS PAPER SETTING menu
appears.
3 Adjust the tray extension and the
paper guides to fit the size of paper
being loaded.
To Next Page
Loading...
