Develop ineo 213 - Making Copies Using a Finishing Setting (with the Document Loaded into the Document Feeder)

6
Advanced copy operations
6-6 ineo 163/213
Making copies using a finishing setting (with the document loaded into
the document feeder)
2
Note
"GROUP" appears only if the document feeder or reverse automatic
document feeder is installed.
1 Load the document into the
document feeder.
– Refer to "Loading the document"
on page 4-18.
2 Press the [Finishing] key.
The COPY FINISHING menu
appears.
3 Press the [+] or [,] key until "SORT" or "GROUP" is selected, and then
press the [OK] key.
The indicator on the [Finishing] key lights up.
COPY FINISHING
SORT
NON-SORT
GROUP