7
Utility mode/Copy mode parameters
7-8 ineo 163/213
Changing settings for the auto panel reset operation ("AUTO PANEL
RESET" parameter)
1 Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2 Press the [+] or [,] key until "AUTO PANEL RESET" is selected, and
then press the [OK] key.
3 Press the [+] or [,] key until "OFF", "30sec", "1min", "2min", "3min",
"4min" or "5min" is selected, and then press the [OK] key.
The "MACHINE SETTING" menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
ENERGY SAVE MODE
AUTO PANEL RESET
AUTO SHUT OFF
AUTO PANEL RESET
30sec
OFF
1min
To Next Page
Loading...
