7
Utility mode/Copy mode parameters
7-18 ineo 163/213
Changing the display language ("LANGUAGE" parameter)
1 Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2 Press the [+] or [,] key until "LANGUAGE" is selected, and then press
the [OK] key.
3 Press the [+] or [,] key until desired language is selected, and then
press the [OK] key.
The "MACHINE SETTING" menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
KEY SPEED SETTING
LCD CONTRAST
LANGUAGE
LANGUAGE
GERMAN
ENGLISH
FRENCH
To Next Page
Loading...
