Utility mode/Copy mode parameters
7
ineo 163/213 7-29
3 Press the [+] or [,] key until the desired number is selected, and then
press the [OK] key.
4 Use the keypad to type in length (X), and then press the [OK] key.
– Refer to the diagram and be sure
to specify the paper width and
length measurements correctly.
– The paper length (X) can be set
between 140 mm and 432 mm.
– To correct the entered value,
press the [Clear/Stop] key.
CUSTOM SIZE MEMORY
MEMORY2
MEMORY1
RETURN
CUSTOM SIZE MEMORY1
Y=297( 90-297)
X=210(140-432) x
length (X)
width (Y)
To Next Page
Loading...
