Develop ineo 213 - Page 248

7
Utility mode/Copy mode parameters
7-46 ineo 163/213
4 Use the keypad to type in the account number, and then press the [OK]
key.
– Specify a three-digit account number (between 001 and 999).
– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
5 Press the [+] or [,] key until "RETURN" is selected, and then press the
[OK] key.
– To register another account number, select "ADD".
– If account numbers for 50 account have already been registered,
the message "UP TO 50 ACCOUNTS" appears.
The "ACCOUNT TRACK" menu appears again.
ACCOUNT NO. REG.
ACCOUNT NO.:111
ACCOUNT NO. REG.
CHECK/EDIT
ADD
RETURN