Develop ineo 213 - Page 250

7
Utility mode/Copy mode parameters
7-48 ineo 163/213
4 Use the keypad to type in account number to be changed or deleted,
and then press the [OK] key.
– Specify a three-digit account number (between 001 and 999).
– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
5 Press the [+] or [,] key until "CHECK/EDIT" is selected, and then press
the [OK] key.
6 Press the [+] or [,] key until the number to be changed or deleted is
selected.
– To change the number, press the [OK] key, and then continue with
step 7.
ACCOUNT NO. REG.
ACCOUNT NO.:111
ACCOUNT NO. REG.
CHECK/EDIT
ADD
RETURN
ACCOUNT NO. EDIT
123
111
234