EasyManua.ls Logo

Develop ineo 213 - Page 55

Develop ineo 213
342 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Precaution
3
ineo 163/213 3-7
No. Part name Description
1 Copy output tray Collects copies and printouts fed out facing down.
2 Front door Opened when replacing the toner bottle. (See p. 8-4.)
3 1st paper drawer Can be loaded with up to 250 sheets of paper
The paper size can be adjusted freely.
Special paper can be loaded. (See p. 7-23.)
4 Manual bypass tray Used for manually feeding paper for making copies.
Load only one sheet of paper at a time.
Special paper can be loaded. (See p. 5-16.)
5 Right-side door re-
lease lever
Used to open/close the right-side door.
6 Right-side door Opened when clearing paper misfeeds.
7 Mechanical counter Indicates the total number of copy and printout s that were print-
ed.
8 RJ45 connector for
networking (optional)
Used for connecting the network cable when this machine is used
for network printing.
9 USB connector Used for connecting a USB cable from the computer.
10 Power switch Used to turn the machine on and off. (See p. 3-19.)
11 Control panel Used to start copying or sending or to specify various settings.
(See p. 3-13.)

Table of Contents

Other manuals for Develop ineo 213

Related product manuals