Contents-4 ineo 163/213
5.2 Stopping/restarting/canceling a copy job .................................... 5-11
5.3 Selecting the paper source ............................................................ 5-13
Automatic tray switching feature .................................................. 5-14
Order for automatically switching paper drawers......................... 5-15
5.4 Making copies on manually fed paper .......................................... 5-16
Paper that can be fed manually.................................................... 5-16
Adjusting the multi bypass tray .................................................... 5-17
Loading plain paper into the bypass tray ..................................... 5-18
Loading overhead projector transparencies into the
bypass tray ................................................................................... 5-21
Loading label sheets into the bypass tray .................................... 5-23
Loading envelopes into the bypass tray....................................... 5-25
Copying onto manually fed paper (manual bypass tray) .............. 5-28
Copying onto manually fed paper (multi bypass tray) .................. 5-31
5.5 Copying onto various types of media............................................ 5-34
Copying onto overhead projector transparencies ........................ 5-34
Copying onto label sheets ............................................................ 5-38
Copying onto non-standard-sized paper...................................... 5-43
Copying onto envelopes............................................................... 5-48
5.6 Specifying a zoom setting .............................................................. 5-53
Zoom ratio settings....................................................................... 5-53
Making copies using an auto zoom ratio...................................... 5-54
Making copies using a preset zoom setting ................................. 5-55
Making copies using a manual zoom ratio ................................... 5-57
Making copies using separate horizontal and vertical
zoom ratios ................................................................................... 5-59
5.7 Selecting a density setting ............................................................. 5-62
Making copies after specifying a copy density............................. 5-63
5.8 Interrupting a copy job.................................................................... 5-65
To interrupt a copy job.................................................................. 5-65
5.9 Checking machine counters........................................................... 5-67
Machine counters that can be checked ....................................... 5-67
6 Advanced copy operations
6.1 Finishing settings (SORT/GROUP)................................................... 6-3
Finishing methods........................................................................... 6-3
Making copies using a finishing setting (with the document
loaded into the document feeder)................................................... 6-6
Making copies using a finishing setting (with the document
placed on the original glass) ........................................................... 6-8
To Next Page
Loading...
