Develop ineo 213 - Page 9

ineo 163/213 Contents-7
Adjusting the width of the erased area
("ERASE SETTING" parameter) ................................................... 7-67
Selecting the setting for small-sized documents
("SMALL ORIGINAL" parameter) ................................................. 7-69
7.9 COPY SETTING 2 ............................................................................ 7-70
Displaying the "COPY SETTING 2" menu.................................... 7-71
Selecting the default copy settings
("COPY PRIORITY" parameter).................................................... 7-72
Selecting the default Finishing setting
("OUTPUT PRIORITY" parameter) ............................................... 7-73
Selecting the 4in1 page order
("4IN1 COPY ORDER" parameter)............................................... 7-74
Selecting the default "MIXED ORIGINAL" setting
("MIXED ORIGINAL" parameter) .................................................. 7-76
Selecting the setting for double-sided copying
("DUPLEX COPY" parameter)...................................................... 7-78
Selecting the setting for crisscross feeding
("CRISSCROSS MODE" parameter) ............................................ 7-80
8 When a message appears
8.1 When the message "TONER EMPTY" appears.............................. 8-3
Replacing the toner bottle.............................................................. 8-4
8.2 When the message "PAPER JAM" appears................................... 8-6
Clearing a paper misfeed inside the machine or in the
1st paper drawer............................................................................ 8-7
Clearing a paper misfeed in the 2nd, 3rd, 4th or 5th (optional)
paper drawer................................................................................ 8-12
Clearing a paper misfeed in the multi bypass tray (optional)....... 8-15
Clearing a paper misfeed in the duplex unit
(option for ineo 213 only) ............................................................. 8-17
8.3 When the message "ORIGINAL DOC. JAM" appears ................. 8-18
Clearing a paper misfeed in the document feeder....................... 8-19
8.4 Main error messages and their remedies .................................... 8-21
9 Troubleshooting
9.1 When incorrect copies are produced ............................................. 9-3
9.2 When the machine is not operating correctly................................ 9-5