DEWESOFT IOLITE V22-2 - IOLITE 16 Xao: Terminal Block Connectors; IOLITE-16 Xao: T2 A2 F Power Connector: Pinout

IOLITE®
TECHNICAL REFERENCE MANUAL
4.6.1.2. IOLITE 16xAO: Terminal block Connectors
IOLITE-16xAO Front
4.6.1.2.1. IOLITE-16xAO: T2A2f Power Connector: Pinout
LV connector: pin-out (TBLOCK male)
Pin
Name
Description
1
+PWR OUT
V
supply
output
2
-PWR OUT
Non-isolated GND
Connector (on the device): OMNIMATE Signal SL 2.50/02/90G
Mating connector (for the cable): OMNIMATE Signal BLF 2.50/02/180
Caution
PWR OUT pins are intended to supply external loads. Do not connect the external power supply
to the PWR OUT pins! It can damage the equipment.
Current limit of PWR OUT source is 2 A per module.
Current limit of the IOLITE system is 16 A!
IOLITE® V22-2 156 / 193