DEWESOFT IOLITE V22-2 - Iolitei-4 Xdo: Specifications

IOLITE®
TECHNICAL REFERENCE MANUAL
IOLITEi-4xDO module
4.7.5.1. IOLITEi-4xDO: Specifications
Digital Output
Output type
Digital
Number of channels
4
Connector
DSUB15HD Female
Maximum update rate
depends on EtherCAT master cycle time
Output type
open collector with active internal pullup to 5 V
Sink
max 50 V, 2 A (resistive load, unprotected)
Source
5 V, max. 40 mA (internally limited)
Max. switching frequency for internal PWM
100 kHz
Isolation
Galvanic isolation CH, GND
Non-Isolated Sensor Power Supply
Output Voltage +5 V
5 V +/- 10 %, 300 mA max.
Max. combined load on +5 V and +12 V pins: 1.5 W reduced by
the load already present on +Vin pin
Output Voltage +12 V
12 V +/-10 %, 100 mA max.
Max. combined load on +5 V and +12 V pins: 1.5 W reduced by
the load already present on +Vin pin
Output Voltage +Vecat
EtherCAT Bus Supply Voltage, 200 mA max. (see 1.)
Power
Power consumption
2.5 W
Environmental
IP rating
IP20
Physical
Dimensions
82 x 67 x 28mm
Weight
130 g
IOLITE® V22-2 177 / 193