DEWESOFT IOLITE V22-2 - IOLITE-1 Xao: Specifications

IOLITE®
TECHNICAL REFERENCE MANUAL
4.6.2.1. IOLITE-1xAO: Specifications
Analog Output
Output types
Voltage
Number of channels
1
Output connector
BNC
DAC Resolution
18-bit
Update Rate
1000 S/sec (see 1)
Full Scale Output Range
±10 V (see 2)
Accuracy (typ.)
0.1 % ±1 mV (0 to 20 mA load)
Temperature gain drift (typ.)
±10 ppm/K
Temperature offset drift (typ.)
±5 uV/K
SNR @ 1000 S/s output rate
92 dB (sine wave, 250 Hz, ±9 V)
THD
-90 dB
Output impedance
0.45 Ω DC
Maximum output current
20 mA
Settling time (0.05 % of set value)
30 μs @ 1000 Ω load, -10 V to 10 V step
Max slew rate
2.5 V/μs @ 1000 Ω load
Max capacitive load (2 % overshoot)
10 nF
Maximum load
500 Ω
Output protection
Short circuit protected
Isolation
X
Power
Power consumption
2 W
Environmental
IP rating
IP20
Physical
Dimensions
93 x 67 x 28 mm
Weight
130 g
1) Only asynchronous mode is supported in Dewesoft, function generator is not supported
2) Only DC output voltage, function generator not supported
IOLITE® V22-2 158 / 193