DEWESOFT IOLITE V22-2 - Iolitei-8 Xlv-10 V; Iolitei-8 Xlv-10 V-T2 A2 F; Iolitei-8 Xlv: Specifications

IOLITE®
TECHNICAL REFERENCE MANUAL
4.1.2. IOLITEi-8xLV-10V / IOLITEi-8xLV-10V-T2A2f
IOLITEi 8xLV-10V is the 8-channel module with channel-to-channel isolation and comes with either BNC
(IOLITEi-8xLV-10V) or terminal block connectors (IOLITEi-8xLV-10V-T2A2f) and a maximum range of 10 V.
4.1.2.1. IOLITEi-8xLV: Specifications
Analog input
IOLITEi-8xLV-10V
Input type
Isolated voltage
Number of channels
8
ADC Type
24-bit oversampled SAR
Sampling Rates
Simultaneous 20k, 10k, 5k, 2k, 1k, 500, 200, 100 S/s (software-selectable)
Voltage Range
±10 V
±1 V
Accuracy
±0.03 % of reading ±5 mV
±0.03 % of reading ±0.5 mV
Typ. SNR (10 kS/s, -1 dBFS sine wave @ 1 kHz)
95 dB
90 dB
Typ. noise floor @ 10 kS
-106 dB
-94 dB
Typ. THD (10 kS/s, -1 dBFS sine wave @ 1 kHz)
-96 dB
-96 dB
Typ. SFDR (10 kS/s, -1 dBFS sine wave @ 1 kHz)
97 dB
96 dB
Typ. IMR @ 400 Hz / 1 kHz
87 dB / 79 dB
88 dB / 81 dB
Typ. Crosstalk @ 10 kHz
-109 dB
-101 dB
Gain Drift
Typical 10 ppm/K, Max. 40 ppm/K
Offset Drift
Typical 1 μV/K + 5 ppm of range/K, Max. 10 μV/K + 15 ppm of range/K
Gain Linearity
< 0.03 %
Input Coupling
DC
Input Impedance
500 kΩ
Overvoltage Protection
In+ to In-: 200 V continuous, 350 Vpeak (100 ms)
Analog input performance
Bandwidth (-3 dB)
0.49*fs
Alias-free Bandwidth
DC to 0.453*fs
Alias Rejection
-100 dB (all sample rates)
Delay Through ADC
37 / fs
Oversampling
32
Additional Specifications
Power supply
9 - 48 V DC
Isolation Voltage
450 Vpeak channel to ground & channel to channel
Power Consumption
Typ. 3 W, Max. 3.6 W
Input Connectors
BNC
Terminal block 2 pole
OMNIMATE SL 2.50 / BLF 2.50/180
Weight
310 g
270 g
Slice Dimensions
128.4 x 127.6 x 30.1 mm
128.4 x 115.4 x 30.1 mm
IOLITE® V22-2 83 / 193