DEWESOFT IOLITE V22-2 - IOLITE-R8: Boxed Chassis: BUS 2: RJ45: Pinout

IOLITE®
TECHNICAL REFERENCE MANUAL
3.3.2.3.5. IOLITE-R8: Boxed Chassis: BUS 2: RJ45: Pinout
IOLITE-R8 includes two RJ45 connectors on Secondary bus (BUS 2) for unbuffered data.
Each RJ45 connector has two LEDs:
- GREEN LED indicates that IOLITE is connected to another device.
- YELLOW LED is active only when the data transfer is active.
Connector used on the device is a standard ethernet connector (RJ45).
Standard ethernet cable with standard connector can be used to connect IOLITE-GATE with a PC.
EtherCAT connector: pin-out (RJ-45 female)
Pin
Name
Description
1
TX_P
Transmission +
2
TX_N
Transmission -
3
RX_P
Reception +
4
-
-
5
-
-
6
RX_N
Reception -
7
-
-
8
-
-
IOLITE® V22-2 48 / 193