Diamond Systems JACKSON - Serial Port(J1)

Jackson User Manual rev 2.2 www.diamondsystems.com Page 26
7.7 Serial Port(J1)
Serial port 2 is available on an RJ-12 connector along the front edge of the board.
1
NC
2
TX2/TX2_P/RX2_P
3
RX2
4
RTS2/TX2_N/RX2_N
5 GND
6
CTS2
Connector type: RJ12 (6P6C) right angle
Connector manufacturer / PN: Link-PP LPJE174-0NNL
Mating Cable PN: 6980104 or any RJ-12 cable with user-specified termination at the other end