CUBE 30 TOUCH | USER MANUAL
1.5 Materials required for use of the instrument
To use the instrument, materials must come exclusively from those manufactured by
DIESSE DIAGNOSTICA SENESE S.p.A. (Always read the instructions for use which
accompany each product before its use); any other part or accessory used in the
instrument may cause damage or incorrect results. The manufacturer therefore declines
all responsibility for damages deriving from inappropriate use.
1.6 Warnings
While the CUBE 30 TOUCH system provides a high level of safety in handling
biological samples, please take all necessary precautions when handling
potentially infected material. Waste material at the end of the cycle must be processed
in accordance with the local waste requirements.
It’s recommended to restart, switch the instrument off and on again, at the end of the
working day to avoid problems of overloading the CUBE 30 TOUCH memory.
1.7 Personal protective equipment (PPE)
Normal use of the instrument does not require the user to come into contact with a
biological sample. In any case, the user must wear personal protective equipment, in
compliance with the laws of his country. PPE consist of at least:
• Gloves
• Safety glasses
• Lab coat
1.8 Ordinary maintenance
The CUBE 30 TOUCH has been designed and built to require minimal
maintenance.
Before any maintenance work:
• Turn off the instrument and disconnect it from the power source.
• Use suitable personal protective equipment during operation.
It is recommended to restart, turning off and on the instrument at the end of the day to
avoid memory overload problems of the CUBE 30 TOUCH.
To Next Page
Loading...
