Diesse cube 30 touch - Page 72

Rev. 2.3
CUBE 30 TOUCH | USER MANUAL
72
The red message "WORKING - Temperature warning!" Is displayed in the status bar to
warn the operator that the instrument is working with a temperature outside the
acceptable limit.
In the print report (Figure 47) and in the archive, if the sample is processed with a
temperature lower than 15 ° C or higher than 35 ° C, the “!” character follows the ESR
result.
The temperature out of range warning is displayed in the status bar, even if the
temperature does not respect the limits allowed during a work session. At the end of the
analysis, for the samples analyzed in this condition, the ESR value is followed by the "!" in
the print report and in the archive.